V1 Calibration Block
V2 Calibration Block
NAVASHIP Block
Reference Block
IOW Block
ASME Block for Non-Piping
ASME19mm Block
ASME 38mm Block
ASME 75mm Block
ASME Block for Piping
Block Diameter: 114.3mm; Thickness: 18mm
Block Diameter: 166.5mm; Thickness: 34mm
Block Diameter: 219.1mm; Thickness: 28mm
Block Diameter: 355.6mm; Thickness: 50mm
Block Diameter: 406.4mm; Thickness: 36mm
Geometry:
Plate to Plate Single V Butt Weld 300mm Long end 150 mm Wide on Either Side of the Weld thickness 16 mm
| SN | Defect Type | Length | Depth |
| 1 | Lack of Penetration | 12mm | |
| 2 | Lack of Fusion | 15mm | 8-10mm |
| 3 | Slag Inclusion | 20mm | 6-8mm |
| 4 | Excess Penetration | 15mm |
Geometry:
Plate to Plate Double V Butt Weld 300 mm Long And 150mm Wide on Either Side of The Weld thickness 25mm.
| SN | Defect Type | Length | Depth |
| 1 | Lack of Penetration | 12mm | |
| 2 | Lack of Fusion | 15mm | 15-18mm |
| 3 | Slag Inclusion | 15mm | 7-10mm |
| 4 | Excess Penetration | 15mm | 3-6mm |
Geometry:
Pipe to Pipe Butt Weld Joint With Pipe 10inch Dia. And 150mm Wide on Either Side of The Weld Thickness 22mm.
| SN | Defect Type | Length | Depth |
| 1 | Lack of Penetration | 12mm | |
| 2 | Lack of Fusion | 10mm | 10mm |
| 3 | Cluster Porosity | 15mm | 15mm |
| 4 | Toe Crack | 15mm | 3-6mm |
| 5 | Excess Penetration | 12mm |
Geometry:
Plate to Plate T Joint With 6mm Thick Plate, 250mm Long & 150mm Base And 100mm Wide T Including One Parent Metal Flaw.
Material: Carban Steel
Flaws: 3per specimen, randomly placed.
Specimen Tolerance:+/- 0.080”
Defects: Centre line crack, Porosity & HAZ crack.
Geometry:
Plate to Plate T Joint With 6mm Thick Plate, 250mm Long & 150mm Base And 100mm Wide T Including One Parent Metal Flaw.
Material: Carban Steel
Flaws: 3per specimen, randomly placed.
Specimen Tolerance:+/- 0.080”
Defects: Centre line crack, Transverse Crack & Porosity.
Geometry:
Plate to Plate Butt Joint With 6mm Thick Plate, 250mm Long & 75mm Wide of Either Side of The Weld Including One Parent Metal Flaw.
Material: Carban Steel
Flaws: 3per specimen, randomly placed.
Specimen Tolerance:+/- 0.080”
Defects: Centre line crack, Star Crack & Porosity.
Geometry:
Plate to Plate Butt Joint With 6mm Thick Plate, 250mm Long & 75mm Wide of Either Side of The Weld Including One Parent Metal Flaw.
Lamination Plate: -
Lamination Plate Thickness 20mm. Lamination UT Thickness Training & Certification Plates. Lamination and Pitting Specimens Plate Dimensions: 300mm (L) X 250mm (W) X 20mm (T) Material: Carbon Steel Lamination defects were placed randomly in thespecimens. Some of specimens will have Naturally obtained. Lamination recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion.
